home < 产品展厅 < 低压发泡机   

　> Low Pressure Foam Machine
 
 一、适合/APPLICATION

自结皮、高回弹、慢回弹、硬质发泡、汽/机车坐垫、枕头、方向盘、保险杆、自行车坐垫、玩具类、雕花门材料、健身器材、汽车滤清器、冷藏库、保温品。

Itegral skin foam,high uniform,slowly uniform,rigid foam,automatic and motorcycle seat cushion,pillow,steering wheel,bumper fascia,bike seat cushion,toy,carving door meterial,body health goods,automotive filter,refrigerator,thermo-keeping products.
 
 二、特点/FEATURES

Ⅰ.混合头：搅拌均匀，保养容易。
Ⅱ.计量PUMP:使用特殊计量泵，进行计量，品质稳定。
Ⅲ.原料配合比：调整范围广宽广。
Ⅳ.系统：设有温度、压力、转速、灌注、清洗系统。
Ⅴ.搅拌：混合头对于高粘度和低粘度原液均能充分搅拌。
Ⅶ.防止原液逆流装置：可以完全密封。

Ⅰ.The mixing head provides maximum uniformity of agitation.Easy to maintain.
Ⅱ.Special metering pump ensures consistent quality.
Ⅲ.Wide range adjustment for material mixing ratio.
Ⅳ.The system was divided into different apart,and worked independently.
Ⅴ.High and low viscosity of matarial can be completely mixed.
Ⅵ.Anti-flowback of liquid material drive is comletely sealed.
 
 三、外形图/OUTLINE DIAGRAM



MATERIAL TANK

 



MIXING HEAD

 

  Manufactured from SUS304 material.
 Standard tank capacity is 100L.double
 jackets tank shell keeps material
 temperature stable.
   High carbon steel mixing head
  provides excellent mixing , precise
  metering easy operation and simple
  maintence.
 

原料桶

 材质：SUS304，标准容量100L 夹层式恒温
 确保原料品质温度稳定。

混合头

 高炭钢混合头，搅拌良好、计量准确 、
 操作方便 保养容易。
 
 四、主要参数/MAIN PARAMETERS

一、两组分原液可以分别调制温度。控温精度 ±1℃(发泡机自带电加热装置，冷却原液需外接冷水）。
二、吐出量在多元醇组分和异氰酸酯组分比例为1 :1时最小60g/s ，最大300g/s。以上范围内两组分原液吐出量可以分别无级调节。
三、原液计量误差不大于1%。
四、原液注入定时范围0.1-99.9s，计时误差不大于0.1s。原液注入定时12个。
五、混合器转速约3000r/min。
六、原液贮罐有效容积100L；溶剂贮罐容积20L。